# Fraud detection

> Check applicants for fraud risk with five signals. Check them yourself, or automatically on ATS Premium.

## Overview

Dover checks an application for five signals that often appear on fraudulent applications and gives the applicant a fraud risk level. You see the risk level on the applicant card in **Applicants**, and the signals that were flagged when you open an applicant.

Dover checks an applicant when you ask it to. On ATS Premium, Dover can also check every new applicant to a job automatically.

---

## Check an applicant

1. Go to **Applicants**.
2. Find the applicant in the list. An applicant Dover has not checked shows a **Check fraud** button next to the name.
3. Click the button, or select the applicant, open the **Fraud risk** tab and click **Check fraud risk**.

Dover checks the applicant, shows the risk level in a message at the bottom of the page, and opens the applicant's **Fraud risk** tab. The button then changes to a red or yellow warning icon, or to a green check when the risk level is low.

On a Free plan, each user gets 10 checks. The message shows how many checks you have left. After you use them, the **Check fraud** and **Check fraud risk** buttons open the upgrade options. On ATS Premium, there is no limit.

On a Free plan, you cannot check an applicant whose profile is locked because it is older than your plan's history limit. Dover shows the upgrade options and does not use one of your checks.

---

## Check new applicants automatically

On ATS Premium, Dover can check every new applicant to a job as the application comes in. Automatic checks are off until you turn them on for the job. You need the **Edit job** permission.

1. Open the job and click the gear icon (**Job Settings**).
2. Click **Fraud risk**.
3. Under **Fraud risk checks**, turn on **Check new applicants automatically**.

Dover checks each new application once, after it finishes processing the applicant's profile. Applicants who applied before you turned the setting on are not checked. Check them yourself, or see [Check many applicants at once](#check-many-applicants-at-once).

---

## How Dover checks an application

Dover does not check an application again on its own. On ATS Premium, you can check applicants again yourself. See [Check many applicants at once](#check-many-applicants-at-once).

Dover checks these five signals:

| Signal | Flagged when |
| --- | --- |
| **New social profile** | The application includes a social profile that Dover first saw less than a year ago, so there is little social media presence to verify. An application with no social profile is not flagged. |
| **Applied to several other jobs** | The applicant applied to 5 or more other jobs on Dover with the same email address. |
| **Only well-known employers on the resume** | The resume lists 2 or more employers, and every one of them is a large, well-known company such as Google, Deloitte or Goldman Sachs. Dover reads the employers from the resume. |
| **Non-Google email address** | The applicant's email address is not a Gmail address. |
| **No Dover job board account** | No account on the Dover job board uses the applicant's email address. |

If Dover doesn't have the information for a signal, for example the applicant has no profile, that signal is **Clear**.

The employer signal shows **Not checked** when Dover skipped it: when the other four signals already decide the risk level, when the application has no resume, or when the resume could not be read. A skipped signal does not count toward the risk level.

---

## Risk levels

Some signals count more than others, because some are flagged for many genuine applicants:

| Signal | Share of the total |
| --- | --- |
| **New social profile** | 10% |
| **Applied to several other jobs** | 20% |
| **Only well-known employers on the resume** | 30% |
| **Non-Google email address** | 30% |
| **No Dover job board account** | 10% |

Dover adds up the shares of the flagged signals to get the risk level:

| Flagged signals add up to | Risk level | What you see on the applicant card |
| --- | --- | --- |
| 75% or more | High | A red warning icon |
| 50% or more, but less than 75% | Medium | A yellow warning icon |
| Less than 50% | Low | A green check icon |

For example, an applicant flagged for a non-Google email address and for applying to several other jobs is at 50%, so the risk level is medium. An applicant can only reach high risk when the employer signal is flagged, because the other four signals add up to 70%.

Hover over the icon to see the risk level and how many signals were flagged, or click it to open the **Fraud risk** tab. A high or medium risk level is a reason to look closer, not proof of fraud. Review the applicant yourself before you reject them.

On ATS Enterprise, you can make some signals count more than others for a job. See [Change how much each signal counts](#change-how-much-each-signal-counts).

---

## Review an applicant's signals

1. Go to **Applicants** and select an applicant, or click the risk icon on an applicant card.
2. Open the **Fraud risk** tab, next to **Resume**, **Application**, **Emails** and **Notes**. If Dover has not checked the applicant yet, the tab shows a **Check fraud risk** button. See [Check an applicant](#check-an-applicant).
3. At the top of the tab, the banner sums up the result, for example "Medium fraud risk · 60% flagged".
4. Read the list of signals under the banner. Each signal shows a short explanation, **Flagged** or **Clear**, and its share of the total.

If the job has its own signal weights, the shares follow those weights, and a signal that is turned off shows **Off for this job**.

The **Settings** link on the right of the banner opens the job's fraud risk settings, where you can check new applicants automatically or change how much each signal counts.

After you review the signals, advance or reject the applicant as usual.

---

## Change how much each signal counts

On ATS Enterprise, you can decide how much each signal counts for a job. For example, make **Applied to several other jobs** count more on a job that attracts repeat applicants, or turn off **Non-Google email address** on a job where most applicants use a work email address. You need the **Edit job** permission.

1. Open the job and click the gear icon (**Job Settings**).
2. Click **Fraud risk**.
3. Under **Fraud risk weights**, drag the slider for each signal, from 1 to 10. Drag to the right to make the signal count more, and all the way to the left to turn it off for this job. The bar above the sliders shows each signal's share of the total as a percentage, and every share changes when you move a slider. At least one signal must stay on.
4. Click **Save**.

To go back to the [default shares](#risk-levels), click **Reset to default**, then **Save**.

With your own weights, Dover adds up the percentages of the flagged signals in the same way: 75% or more is high risk, and 50% or more is medium risk.

For example, set **New social profile** to 6 and the other four signals to 1. The bar then shows 60% for **Social profile** and 10% for each other signal. An applicant flagged only for a new social profile is then at 60%, so the risk level is medium.

New weights apply to applications that arrive after you save. Applicants Dover already checked keep their risk level until you [check them again](#check-many-applicants-at-once). Each job has its own weights, and a job you haven't changed uses the default shares.

---

## Filter applicants by fraud risk

1. Go to **Applicants**.
2. Click **Filters** in the toolbar, then **Fraud risk**.
3. Select one or more of **High**, **Medium** and **Low**.

The list shows only applicants that match your selection. Clear the checkboxes to see all applicants again.

---

## Check many applicants at once

The signals can change after Dover first checks an application, for example when the applicant applies to more jobs on Dover. On ATS Premium, you can check many applicants at once, including applicants Dover already checked:

1. Go to **Applicants** and click **Select applicants**.
2. Choose the applicants you want, or select all.
3. Open the actions menu and click **Check fraud risk**.

Dover checks the selected applicants in the background and shows the progress in the bottom-right corner. You can keep working. When it finishes, the applicant list shows the new risk levels and signals.

The action also gives a risk level to applicants Dover has not checked yet. On a Free plan, the **Check fraud risk** action is not in the menu.

---

## Free, Premium and Enterprise

Every plan can check applicants for fraud risk. Free plans get 10 checks for each user. Premium has no limit and can check new applicants automatically. Enterprise includes everything in Premium, plus your own signal weights for each job.

| | Free | Premium | Enterprise |
| --- | --- | --- | --- |
| Check an applicant yourself | 10 checks for each user | No limit | No limit |
| **Check new applicants automatically** | Not available | Available, off by default | Available, off by default |
| Risk icons and signals | For every checked applicant | For every checked applicant | For every checked applicant |
| **Check fraud risk** bulk action | Not available | Available | Available |
| **Fraud risk** filter | Not available | Available | Available |
| **Fraud risk weights** for each job | Not available | Not available | Available |

On Free and Premium, you can move the sliders on the **Fraud risk** page in Job Settings, but **Save** opens the Enterprise details instead of saving. If your plan changes from Enterprise to another plan, Dover goes back to the default shares the next time it checks an applicant.

On a Free plan, Dover never checks an applicant on its own. Each user on your team has their own 10 checks, and the checks do not come back after you use them. Dover's sample applicants don't count.

If your plan changes from Premium to Free, Dover keeps the risk levels for applicants it already checked, stops checking new applicants automatically, and removes the **Fraud risk** filter from your applicant list.

---

## Frequently asked questions

### Does Dover reject applicants with a high fraud risk?

No. Fraud detection only labels applicants. Dover never rejects, hides or moves an applicant because of the fraud risk level.

### Will applicants know they were checked for fraud?

No. The fraud risk level and the signals are only visible to members of your company in Dover.

### Can I turn off fraud detection for a job?

Dover only checks new applicants automatically on jobs where you turned on **Check new applicants automatically**. Turn the setting off to stop. On ATS Enterprise, you can also turn off single signals for a job. See [Change how much each signal counts](#change-how-much-each-signal-counts).

### Where can I see pricing and plan details?

Free plans get 10 fraud checks for each user, and ATS Premium has no limit (see [Free, Premium and Enterprise](#free-premium-and-enterprise)). See [dover.com/pricing](https://www.dover.com/pricing) for current plans.
